Listing of file='GRAPCC.BAS;01' on disk='vmedia/execugraph_instructions-sector.ccvf'
10500 PLOT 6,2,12,15,29,3,17,3:PRINT "GRAPH CONTROL COMMANDS:-" 10510 PLOT 3,8,5:PRINT "THERE ARE NINE COMMANDS UNDER THIS HEADING:-" 10520 PLOT 3,9,7:PRINT "1) CLEAR";SPC( 17);"6) HORIZONTAL (NUMBER)" 10530 PLOT 3,9,8:PRINT "2) NEW";SPC( 19);"7) STARTING DATE (DATE)" 10540 PLOT 3,9,9:PRINT "3) COLOUR (COLOUR KEY) 8) TITLE (NEW TITLE)" 10550 PLOT 3,9,10:PRINT "4) HIGH (NUMBER)";SPC( 9);"9) UNITS TITLE (NEW TITLE)" 10560 PLOT 3,9,11:PRINT "5) LOW (NUMBER)" 10570 PLOT 3,5,13:PRINT "BOTH THE CLEAR AND NEW COMMANDS ERASE THE SCREEN, HOWEVER" 10580 PLOT 3,5,14:PRINT "THEY DO NOT ERASE THE 0 FILE. THE NEW COMMAND ALLOWS" 10590 PLOT 3,5,15:PRINT "AUTOMATIC RESCALING BOTH HORIZONTALLY AND VERTICALLY AS" 10600 PLOT 3,5,16:PRINT "WELL AS RESETING THE COLOUR TO GREEN FOR THE NEXT GRAPH" 10610 PLOT 3,5,17:PRINT "REQUESTED. THE CLEAR COMMAND DOES NOT ALTER THE GRAPH" 10620 PLOT 3,5,18:PRINT "SCALING OR THE COLOUR FOR THE NEXT GRAPH REQUESTED." 10630 PLOT 3,5,20:PRINT "THE COLOUR COMMAND IS EFFECTED BY TYPING COL THEN A BLANK" 10640 PLOT 3,5,21:PRINT "SPACE FOLLOWED BY THE RETURN KEY. WHEN PRODUCING SIDE BY" 10650 PLOT 3,5,22:PRINT "SIDE BARGRAPHS THE COLOURS IN THE SEQUENCE RED GREEN YELLOW" 10660 PLOT 3,5,23:PRINT "BLUE MAGENTA CYAN & WHITE ARE AUTOMATICALLY PRODUCED." 10670 PLOT 3,5,24:PRINT "WITH THE USE OF THE COLOUR COMMAND THIS SEQUENCE CAN BE" 10680 PLOT 3,5,25:PRINT "ALTERED BEFORE GRAPHING EACH SET OF BARS. BLACK CAN ALSO" 10690 PLOT 3,5,26:PRINT "BE USED TO EFFECT WHEN OVER LAYING GRAPHS." 10700 PLOT 3,19,29:PRINT "PRESS RETURN TO CONTINUE" 10710 PLOT 3,44,29:INPUT "";T$ 10720 PLOT 12 10750 PLOT 3,13,2:PRINT "(GRAPH CONTROL COMMANDS)" 10820 PLOT 3,18,5:PRINT "HIGH AND LOW COMMANDS" 10830 PLOT 3,7,7:PRINT "WHEN DATA IS BEING LOADED FROM DISK , AUTOMATIC" 10840 PLOT 3,7,8:PRINT "SCALING TAKES PLACE. SCALING INTERVALS TO ACCOMODATE" 10850 PLOT 3,7,9:PRINT "HIGH AND LOW EXTREMES OF DATA ARE SELECTED. THESE" 10860 PLOT 3,7,10:PRINT "MAY NOT BE SUITABLE, THEREFORE THE COMMANDS HIGH AND" 10870 PLOT 3,7,11:PRINT "LOW CAN BE USED TO ALTER THE SCALING. ALL THAT IS" 10880 PLOT 3,7,12:PRINT "REQUIRED IS THE COMMAND AND A NUMBER E.G. HIGH 50" 10890 PLOT 3,7,13:PRINT "WOULD ALTER OUR PREVIOUS EXAMPLES WHEN REGRAPHED SO" 10900 PLOT 3,7,14:PRINT "THAT THE HIGHEST VALUE ON THE GRAPH WAS 50. SOME LEVEL" 10910 PLOT 3,7,15:PRINT "OF SCALING OVERIDE STILL EXISTS WHEN YOUR NUMBER CHOSEN" 10920 PLOT 3,7,16:PRINT "IS NOT EASILY DIVISIBLE E.G. IF THE SCALING INTERVALS" 10930 PLOT 3,7,17:PRINT "CAME TO AN ODD FIGURE LIKE 48.333 - THE PROGRAM WOULD" 10940 PLOT 3,7,18:PRINT "ROUND THE INTERVAL TO 50." 10950 PLOT 3,18,21:PRINT "HORIZONTAL COMMAND" 10960 PLOT 3,7,23:PRINT "THE HORIZONTAL SCALING OF A DATA DIPLAY IS CHOSEN BY" 10970 PLOT 3,7,24:PRINT "THE PROGRAM TO INCLUDE ALL THE DATA IN THE FILE AND" 10980 PLOT 3,7,25:PRINT "STILL FILL THE SCREEN TO THE GREATEST EXTENT. IN ORDER" 10990 PLOT 3,7,26:PRINT "TO CHANGE THE HORIZONTAL SCALING THE COMMAND HORIZONTAL" 11000 PLOT 3,7,27:PRINT "FOLLOWED BY THE NUMBER OF DATA POINTS YOU WISH YOU" 11010 PLOT 3,7,28:PRINT "DISLAY IS USED." 11020 PLOT 3,19,30:PRINT "PRESS RETURN TO CONTINUE" 11030 PLOT 3,44,30:INPUT "";T$ 11100 PLOT 6,2,12,15,29,3,16,1:PRINT "(GRAPH CONTROL COMMANDS)" 11110 PLOT 3,19,3:PRINT "STARTING DATE COMMAND" 11120 PLOT 3,6,5:PRINT "IF YOU WISHED ONLY TO LOOK AT THE END PART OF A" 11130 PLOT 3,6,6:PRINT "GRAPH AND, ON A SCALE THAT WAS TOO LARGE FOR ALL THE" 11140 PLOT 3,6,7:PRINT "GRAPH TO FIT ON THE SCREEN, YOU CAN SELECT A STARTING" 11150 PLOT 3,6,8:PRINT "DATE THAT COMMENCES AT THE FIRST DATA POINT THAT IS" 11160 PLOT 3,6,9:PRINT "REQUIRED. THE COMMAND STARTING DATE FOLLOWED BY THE" 11170 PLOT 3,6,10:PRINT "DATE IS ALL THAT IS REQUIRED. E.G. STA 4/80." 11180 PLOT 3,19,12:PRINT "TITLE AND UNITS TITLE COMMANDS" 11190 PLOT 3,6,14:PRINT "WHEN YOU CREATE A FILE YOU HAVE TO NAME BOTH THE TITLE" 11200 PLOT 3,6,15:PRINT "AND THE UNITS TITLE. TO ALTER THESE TYPE IN EITHER TITLE" 11210 PLOT 3,6,16:PRINT "OR UNITS DEPENDING WHICH YOU WISH TO ALTER, THEN THE NEW" 11220 PLOT 3,6,17:PRINT "NAME. THE NAME WILL CHANGE IMMEDIATELY AND WILL BE" 11230 PLOT 3,6,18:PRINT "AUTOMATICALLY CENTERED. IF YOU WANT THE TITLES TO BE A" 11240 PLOT 3,6,19:PRINT "DIFFERENT COLOUR FROM THE GRAPH THEN PRESS A COLOUR KEY" 11250 PLOT 3,6,20:PRINT "AFTER THE SPACE FOLLOWING THE COMMAND AND BEFORE THE NAME." 11260 PLOT 3,6,21:PRINT "IF YOU WISH TO OVERLAY A NUMBER OF GRAPHS BUT ONLY REQUIRE" 11270 PLOT 3,6,22:PRINT "ONE TITLE THEN THE SURPLUS TITLES CAN BE ELIMINATED BY" 11280 PLOT 3,6,23:PRINT "TYPING IN THE COMMAND TITLE FOLLOWED BY A SPACE, COLOUR" 11290 PLOT 3,6,24:PRINT "KEY AND RETURN WITHOUT ENTERING THE TITLE NAME. DO THIS" 11300 PLOT 3,6,25:PRINT "AS YOU DISPLAY EACH SEPARATE GRAPH." 11310 PLOT 3,18,29:PRINT "PRESS RETURN TO CONTINUE" 11320 PLOT 3,43,29:INPUT "";T$ 11400 PLOT 6,2,12,15,29,3,7,9:PRINT "THAT IS ALL THE GRAPH CONTROL COMMANDS." 11410 PLOT 3,7,11:PRINT "IF YOU WISH TO REVIEW, THEN TYPE R AND PRESS RETURN KEY." 11420 PLOT 3,7,13:PRINT "IF YOU WISH TO EXIT THE PROGRAM AT THIS STAGE, THEN" 11430 PLOT 3,7,15:PRINT "TYPE F AND PRESS RETURN KEY." 11440 PLOT 3,16,20:PRINT "PRESS RETURN TO CONTINUE" 11450 PLOT 3,43,20:INPUT "";T$ 11460 IF T$= "R"GOTO 10500 11470 IF T$= "F"GOTO 12000 11480 LOAD "STATS":RUN 12000 PLOT 12 12010 END